SRS Light Plasa member SRS Light Plasa member Facebook



1.June 2016: DXD-8NI; 1U DMX merger

 

DXD-8NI merger

DXD-8NI merger

 

Datasheet NI

Manual NI

    DXD-8NI is a two-input DMX merger with HTP / LTP / DMX-A backup or DMX-B backup modes. It is ideal for applications where merging of two DMX signals is needed. Examples of usage are two DMX consoles controlling one dimmer system or controlling of house light. Moreover, the unit can be used as a scene call device for calling of the minimum DMX value.

    This value is then sent to dimmer with connected LED lights in case the main console is disconnected or LED lights are flickering on low DMX value because of technical requirements of LEDs.

    DXD-8N is equipped with a bootloader for easy firmware update.

    All connections are made thru 3/5 and RJ45 terminals and unit is easy for setup via 12x2 display, encoder and 2 buttons.

    The display shows several pages of information including: DMX A and B status; merger mode

    Features include:

    • Two DMX inputs merge to single DMX output
    • RDM ANSI E1.20 as standard
    • FULL ISOLATED DMX = Optocoupler isolation + DC/DC power
    • All DMX/RDM outputs are boosted signals (connect up to 32 devices per output)
    • DMX Channel offset for each input and also output
    • DMX scenes that can be loaded when input signal is lost
    • DMX scenes wich can be mixed vith HTP/LTP rules
    • Shift of DMX address for all inputs and outputs
    • Minimum scene setting /for LED equipment
    • Screw terminal for remote buttons
    • Firmware update via SRS upgrade cable

1.April 2016: Prolight+Sound 2016, 5-8 April 2016

FF

Click for download

SRS Light Design will be present at the Prolight + Sound 2016 Exhibition, Frankfurt am Main, 5-8.4.2016.

Prolight+Sound 2016

We will be pleased to meet you on our stand now located in Hall 3.0 B88 and show you our innovated products.

New products for this show:

  • Installation RCK system dimmer/switch
  • New Digital range of DV controllers
  • New CASE controllers
    • LV control
    • DV control

1.February 2016: ISE2016, 9-12 February 2016, Amsterdam RAI

ISE LOGO

SRS Light Design will be present at the ISE2016, Amsterdam, 9-12.2.2016.

We will be pleased to meet you on our stand now located in Hall 7 P230 and show you our products.

ISE2016

 

23.December 2015: Christmas 2015

PF2014

20.November 2015: MCP8-DV-CEE: Hoist controller in plastic case

MCP8-DV-CEE

 

Manual MCP8-DV

Datasheet MCP8-DV

 

  • Motor Controller for maximum of 8 direct voltage hoist
  • 2x MCB16A and RCD 30mA protection of outputs
  • MPA - Manual phase align via power input connector
  • Hoist type: BGV D8, BGV D8+
  • Hoist connection CEE16/4p
  • Link connector

  • Compatible with:
    • CM lodestar
    • Trabes
    • Prolyft
    • Verlinde/Stagemaker
  • Size: Plastic Case
  • Weight: 12kg

20.November 2015: New MCPseries LV hoist controllers in plastic case

MCP-LV controllers

LV RANGE

  • Motor Controller for maximum of 6 low voltage hoist
  • 2x MCB16A and RCD 30mA protection of outputs
  • MPA - Manual phase align via power input connector
  • Hoist type: BGV D8, BGV D8+
  • Hoist connection Socapex19 Female
  • GROUP stop - when 1-3 breaker or 4-6 breaker will trip the controller will STOP
  • Link connector

  • Compatible with:
    • CM lodestar
    • Trabes
    • Prolyft
    • Verlinde/Stagemaker
  • Size: Plastic Case 340x425x170mm
  • Weight: 7,7kg

LV RANGE

 

 

20.November 2015: New MCPseries DV hoist controllers in plastic case

MCP-DV controllers

MCseries DV case

DV RANGE

 

  • Motor Controller for maximum of 8 direct voltage hoist
  • 2x MCB16A and RCD 30mA protection of outputs
  • MPA - Manual phase align via power input connector
  • Hoist type: BGV D8, BGV D8+
  • Link connector

  • Compatible with:
    • CM lodestar
    • Trabes
    • Prolyft
    • Verlinde/Stagemaker
  • Size: Plastic Case 340x425x170mm
  • Weight: 7,7kg

 

DV RANGE

2.April 2015: Prolight+Sound 2015, 15-18 April 2015

FF

Click for download

SRS Light Design will be present at the Prolight + Sound 2015 Exhibition, Frankfurt am Main, 15-18.4.2015.

Prolight+Sound 2015

We will be pleased to meet you on our stand now located in Hall 9.0, D05 and show you our innovated, latest products.

New products for this show:

  • NLP-Network loadcell processor
  • RDM splitters
  • DMX scene setter with proportional controll
  • New PELI-CASE controllers
    • CEE+Harting16
    • CEE+Socapex19

20.March 2015: Network loadcell processor

Loadcell

Datasheet NLP8

Loadcell

Datasheet NLP4

 

NLP unit was designed to process simple and accurate load measurements for use in any number of rigging and load bearing applications. Unit consists of the following system elements: Network loadcell processor, shackle and the MAC/PC software suite.

The NLP reads values from analog loadcell shackles with 4-20mA output and features the direct e-stop output for SIL-3 systems.

PC or MAC is not needed during the operation or setup. The NLP can work as a fully independent part of rigging setup.

The NLP is easy-to-use and user-friendly device developed by riggers.

 

Loadcell

Datasheet NLP-SOFTWARE

More details ...

3.March 2015: New multipin outputs options for MCx-DV-BASIC

MCx-DV-VARIANTS

Datasheet

  • Are you using multipin connectors for the hoist controllers?
  • We can offer new BASIC controllers with Socapex19 or Harting 16
  • There are several standards of wiring so wiring diagram can be customised to fit the old controllers of Prolyte or other brands - contact us at sales@srslight.com for more details

 

23.January 2015: PDP60xx, 6 Channel DMX dimming pack

PDP60xx 6channel DMX pack

PDP60xx 6channel DMX pack

 

Manual

  • PDP60xx is providing you with next generation dimming for portable or
    permanent installations. Just plug in and play anytime, anywhere.
    Is great for applications requiring distributed dimming and position flexibility:
    • Industrial productions
    • Rental productions
    • Conference centres
    • Museums
    • Exhibition centres
  • 6x6A, 6x10A or 6x13A dimming capacity + HOT POWER

 

  • AC3x230V/400V 50Hz via CEE plug + thru output
  • Risetime: 400us
  • Convectional cooled, fan runs only on critical temperature
  • MCB for each channel, optional 1P+N or 2P DELTA
  • Variable output connectors
  • Neutrik XLR 3+ 5 pin input connectors
  • LED indicators of power ON, DMX line state
  • Multi item menu with preheat, limits, curves...
  • Optional wireless DMX
  • Optional single phase operation

 

More details ...

22.December 2014: Christmass 2014

PF2014

20.November 2014: NLP12: Network loadcell processor

Loadcell

Datasheet NLP12

Loadcell

Datasheet NLP-SHACKLE

NLP unit was designed to process simple and accurate load measurements for use in any number of rigging and load bearing applications. Unit consists of the following system elements: Network loadcell processor, shackle and the MAC/PC software suite.

The NLP reads values from analog loadcell shackles with 4-20mA output and features the direct e-stop output for SIL-3 systems.

PC or MAC is not needed during the operation or setup. The NLP can work as a fully independent part of rigging setup.

The NLP is easy-to-use and user-friendly device developed by riggers.

 

20.November 2014: LDI2014 exhibitition

LDI2014

 

21-23 November, 2014, Las Vegas convention center, Nevada, US

We will be pleased to meet you on our stand

Aeson, Booth:2491

New products for this show:

  • Network loadcell processor
  • US controllers
  • DATA distribution devices